How to Eliminate Humidity in the Pantry?
Language
Helske

How to Eliminate Humidity in the Pantry?

Problems with increased humidity in the pantry should be solved before moulds start to appear on the walls and shelves. High humidity means a problem for the food stored because it can get spoilt. Moisture appears primarily because of thermal bridges such as corners or various caps.

You can eliminate it and prevent the appearance of unpleasant moulds also with the Nano Coat System building material.

Thanks to this special mixture developed with nanotechnology, you can tackle the problems with humidity in the pantry effectively. By applying it to the walls, a thermal reflective layer is formed which reflects thermal radiation back to the room but permeates water vapour. It removes excessive humidity and, consequently, prevents the appearance of moulds. Its application prevents the condensation of moisture on the surface of the walls and the ceilings, so the walls can breathe naturally. With the Nano Coat System, moisture in the structure decreases by about 10% compared to structures without the application of the system. The system is suitable to all the rooms where food is present, since it complies with the EU requirements for the certification of food contact materials.



Which Places Should the Material be Applied to in the Pantry?

Apply the Nano Coat System to all the walls and the ceiling of the pantry. You can apply it also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present. Also around the windows where moisture condenses.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Home the final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.

 

Apply in the following order: 

 1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

 

 

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM