How to Regulate Humidity in the Living Room with the Nano Coat System
Language
Helske

How to Regulate Humidity in the Living Room with the Nano Coat System

Humidity in the living areas is undesirable, although increasingly frequent. There may be several reasons for it. It happens usually if the living room is situated in a way that at least one of its walls is a circumferential (facade) wall, and there are thermal bridges, windows, or a balcony, are present in it. It is frequently accompanied also by the condensation of water vapours on the surface of the walls. This leads to the appearance of moulds which are dangerous to health because they release spores into the air which cause allergic reactions, upper respiratory tract infections, cough, eczemas or asthma. From a long-term perspective, their presence is very damaging to health.

Regulate the microclimate and the humidity in your living room. The solution is to apply the Nano Coat System active substance.

Thanks to this special mixture developed with nanotechnology, you can tackle the problems with humidity in the living room effectively right in the beginning. By applying it to the walls, a thermal reflective layer is formed which reflects thermal radiation back to the room but permeates water vapour. It removes excessive humidity from the living room and, consequently, prevents the appearance of moulds. The room will heat up faster and an ideal microclimate is achieved. The application of the system prevents the condensation of moisture on the surface of the walls and ceilings, so the walls can breathe naturally. With the Nano Coat System, moisture in the structure decreases by about 10% compared to structures without the application of the system. The product is hypoallergenic and its surface is antibacterial. Therefore, it is ideal for rooms where allergics stay.


Which Places Should the Material be Applied to in the Living Room?

Apply the Nano Coat System to all the walls and the ceiling of the living room. You can apply it also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present, which cause water vapours to condense. Apply the substance also around the windows and the balcony door.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

 

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM