Nano PT
Deep waterproof penetration coating, suitable for most mineral surfaces. It penetrates deep into the foundations and strengthens them.
NANO COAT HOME is white vapor permeable, thermally insulating final plaster layer, for interior use. It actively reduces the time required for heating and cooling rooms, reducing thermal bridges. Problem solution product for rooms that have a high levels of humidity, or buildings where a high level of energy consumtion is required, such as historic listed buildings, medical buildings, schools and creches and offices etc. It is suitable for use in damp areas. Drying Time: 12 -16 hrs at a temperature of 23 °C and 50% relative humidity Shelf Life: 24 months in unopened buckets, stored as per recommendations NANO COAT HOME® has a high water vapor permeability, reducing the possibility of mould formation on wall and ceiling surfaces. The accumulated water vapor in the interior passes more easily out into the exterior, does not condense on the walls and thus prevents the formation of mould. The vapor permeability of the plaster ensures natural breathing of the walls. NANO COAT HOME® can be applied to walls, ceilings and floors. Suitable for rooms with a high level of humidity, historic listed buildings, medical buildings, offices and public spaces, etc. For use in damp areas. It prevents the spread of mould and mildew and stops the growth of microorganisms. It alleviates allergy and asthmatic issues and is suitable for use in hospital environments and indoor public spaces. APPLICATION THICKNESS: 1.5 mm to 2 mm Water vapour permeability (V): 153.5 g/m2.d* Diffusion thickness (sd): 0.144 m at layer thickness – 3 mm (23 °C and 50 % relative humidity) Diffusion resistance factor (μ): 47.76* Fire resistance: B s1 d0 VOC (EN ISO 11890-2): 1.798 g/l Dry bulk density (ρd)*: 180 kg/m3 Emissivity (ε): 0.83 Thermal conductivity coefficient (λ): 0.0396 W/mK * Bond strength: >0.6 Mpa * Layer thickness – 3 mm (23 °C and 50 % relative humidity) Nano Coat Home is a patented, active multifunctional layer, suitable for all types of buildings. It does not contain any volatile organic compounds and creates a healthy indoor living environment across different rooms types. It helps reduce heat loss, eliminates thermal bridges and saves on heating and energy costs. NANO COAT HOME finishes as pure white layer that gives and ideal finishing coat. However, it can be painted, and when choosing an interior paint, we recommend the use of vapour permeable coatings. Also suitable for application of wallpaper. NANO COAT HOME must be applied on dry, degreased and dust-free surfaces. It is recommended to treat the substrate appropriately before applying the layer. Damp masonry is recommended to be drained, treated with a remedial coating and only afterwards to apply the base layers. If the substrate is not coherent, we recommend using NANO AM first. Return on investment depends on the type of construction design and the type of heating or air conditioning system in the room. It depends on how many rooms it is used for. In principle, NANO COAT HOME can save up to 35% of energy, making it a very economical option. Application, drying and finishing is faster than traditional types of plasters. The application layer is only 1.5 – 2 mm. In addition to the cost and energy saving, it is more time efficient when carrying out construction or retrofit projects. Yes, all types of wallpaper adhesives can be used on Nano Coat Home. No. NANO COAT HOME is not only insulation. It is a patented multifunctional layer that has several key features at the same time and helps create a truly healthy microclimate in the room. Its application significantly slows down the heat transfer to the structure. The air cools much slower and can heat up much faster and maintain the set temperature in the room therefore less energy is spent. The same effect After application, Nano Coat Home will increase the surface temperature above the dew point, reducing water vapour condensation and preventing mould formation. Its composition also prevents the growth and spread of microorganisms. Therefore, it is perfectly suitable for creating a healthy home. NANO COAT HOME can be used on any substrate, but it is recommended to first apply primer Helske Primer & Sealer or adhesion bridge Helske Bond-Grit, depending on the type of substrate. NANO COAT HOME is a multifunctional top layer for interior use. Due to its vapour permeability, it can be used not only in all common living areas, but also in rooms with a higher degree of humidity, for example in bathrooms or basements. However, we do not recommend direct contact with water because it is water- soluble. NANO COAT HOME is an absolutely safe material, suitable for various types of interiors. It has an extremely low VOC content (volatile organic compound) and meets the highest standards. Once applied to the surface it helps prevent the spread of fungi and microorganisms, so it makes it particularly suitable for use in ambulances, schools, creches or public buildings. NANO COAT HOME®
indoor thermal plaster solution
Key Features
How it works
Areas for Product Applications
Technical Properties
FAQ
What is NANO COAT HOME?
Can I apply additional layers to NANO COAT HOME? For example, paint or wallpaper?
Can I apply NANO COAT HOME to a damp wall?
What is the approximate return on my investment?
Can I use any type of wallpaper adhesive on the plaster?
Is it the same type of insulation as exterior insulation?
How does NANO COAT HOME prevent moud formation and its spread in the room?
Can I apply NANO COAT HOME to clay plaster?
Can I use NANO COAT HOME in the bathroom?
Is NANO COAT HOME hygienically safe?
Detailed specifications and tutorials for applying Nano Coat System
Our team are available to meet or consult with you on any product and technical inquiries on your building project.
Book an appointmentSell our full range of Helske Energy Save product at your store.
Become a stockistWatch our tutorials and webinars on product applications and stay up-to-date on our innovative sustainable thermal insulation plaster solutions.
Watch nowUpload your project and our design & technical team will advice on all projects large and small form residential retrofit to commercial projects.
Consult with usNano PT
Deep waterproof penetration coating, suitable for most mineral surfaces. It penetrates deep into the foundations and strengthens them.
Nano AM
Special adhesive base with high solids content, for better adhesion of levelling plaster, designed for non-absorbent surfaces such as glass, marble, metal.
Nano TC
Lightweight, smooth, white all purpose filler ideal for repairs on interior walls, ceilings and various filling applications.
Nano TC
Levelling compound for a perfectly smooth surface, suitable for repairing cracks and holes in ceilings, walls and floors.
Unique patented active layer, which belongs to the category of extra light vapor permeable plasters with exceptional thermal insulation properties.
Helske Energy Save manufactures and distributes sustainable building materials with a primary focus on Energy Saving and building methods that enhance a healthy living environment. Our manufacturing and production process is environmentally driven with the lowest impact on the environment and carbon footprint. Through continuous innovation and research, we produce unique building materials using nanotechnology for a new generation of building materials, we strive to be pioneers for the environment and enhance people’s quality of living and wellbeing. We are part of the Helske Group which operates internationally in the construction, healthcare and industrial sectors with 170 staff across 6 countries in Europe.