Language
Helske
1
2
3
4
Nano Coat System

NANO PT

DEEP PRIMER

Product Features

Suitable for most mineral-based surfaces Asbestos-cement-roof panels and tiles Anhydrite Drywall Better coverage Outstanding adhesion Highly absorbent

Product advantages

Stabilising, highly resistant to abrasion

Stabilising, highly resistant to abrasion
Reduces water permeability
Low odour

Product Features

NANO PT is a deep base that stabilises foundations. A styrene acrylic solution disperses and penetrates down into the foundation, sealing pores and capillaries. NANO PT has a low viscosity, which ensures maximum penetration and integration in the foundation.

Use
The foundation must be solid, clean, dry and free of dust and oil. We recommend lightly sanding with suitable sandpaper before application. Shake well before use. Apply the undiluted mixture to the intended surface using a brush, roller or spray dispenser. If the surface is moist, the adhesive strength of the product will be adversely affected. Not suitable for silicone or silicate-based plasters or paints.

Technical information

Yield
Approximately 60 – 80 ml/ m²

Drying time
Approximately 1 – 3 hours at room-temperature of 23ᵒ C with a humidity factor of approximately 50%.

Storage
After use, please keep the product tightly closed in a dry area with a temperature between 5ᵒ C to 30ᵒ C. Keep away from heat or direct sunlight. Excessive humidity and high temperatures can shorten the shelf life of the product.

Shelf life
The product can be stored for up to 18 months in its original unopened packaging if stored as directed.

Safety precautions
Please use it in a well-ventilated area. Wear gloves and your wash hands after use.

Questions? Please review our FAQs!

What do I need to apply the NANO PT?

see answer hide answer

NANO PT can be applied with a brush or roller, and we recommend using standard protective equipment to protect your clothes and hands.

What base to use NANO PT on and for what base do I need NANO AM?

see answer hide answer

It depends on the structure of the base. NANO PT penetrates deep into the base and reinforces it. It is meant for all types of absorbent mineral surfaces.

What advantages does NANO PT have compared to other competitive products?

see answer hide answer

With the NANO PT penetration prime coat, you can be sure that you have one of the highest-quality products in the market. It is environment-friendly, almost odourless, has a high yield, high dry matter content up to 7.08%, it is not a concentrate, so it doesn’t need to be diluted, it does not contain any solvents and its drying time is extremely short. At the same time, it costs only as much as competitive products.

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

ccs@helske.com

ccs@helske.com